How To Root Tecno Spark 6

Using this tutorial, we are going to illustrate How To Root Tecno Spark 6 by making use of Legit Root Tools. Even though the root process of Tecno Spark 6 using Legit Root Tools is completely safe and secure, it’s recommended to make a backup of your device first.

ABOUT Tecno Spark 6

Tecno Spark 6 smartphone was launched on 25th September 2020. The phone comes with a 6.80-inch touchscreen display with a resolution of 720×1640 pixels at a pixel density of 264 pixels per inch (ppi) and an aspect ratio of 20.5:9. Tecno Spark 6 is powered by an octa-core MediaTek Helio G70 processor. It comes with 4GB of RAM. The Tecno Spark 6 runs Android 10 and is powered by a 5000mAh battery. The Tecno Spark 6 supports proprietary fast charging. As far as the cameras are concerned, the Tecno Spark 6 on the rear packs a 16-megapixel primary camera; a second 2-megapixel camera; a third 2-megapixel camera and a fourth 2-megapixel camera. The rear camera setup has autofocus. It sports a 8-megapixel camera on the front for selfies.The Tecno Spark 6 runs HiOS 7.0 based on Android 10 and packs 64GB of inbuilt storage that can be expanded via microSD card. The Tecno Spark 6 is a dual-SIM (GSM and GSM) smartphone that accepts Nano-SIM and Nano-SIM cards. The Tecno Spark 6 measures 170.80 x 77.30 x 9.20mm (height x width x thickness) . It was launched in Comet Black, Dynamic Orange, Misty Violet, and Ocean Blue colours. Connectivity options on the Tecno Spark 6 include Wi-Fi, GPS, USB OTG, Micro-USB, FM radio, 3G, and 4G (with support for Band 40 used by some LTE networks in India). Sensors on the phone include accelerometer, ambient light sensor, proximity sensor, and fingerprint sensor. The Tecno Spark 6 supports face unlock. <

HOW TO ROOT Tecno Spark 6 WITHOUT PC

STEP BY STEP TUTORIAL HOW TO ROOT Tecno Spark 6 WITHOUT PC:

Step 1: Download Legit Root Tools (Link below).

Step 2: Install Legit Root Tools.apk on your device.

Troubleshooting

Step 2.1: If installation is blocked, go to your settings

Step 2.2: Enable ‘Allow installation of apps from sources other than the Play Store

Step 3: Launch “Legit Root Tools ” app and start rooting.

Legit Root Tools is very user-friendly and easy to use. Click “One Click Root” to start rooting..

Step 4: Once the rooting process is done, the phone will restart and you will have a rooted device.

HOW TO ROOT Tecno Spark 6 WITH PC

STEP BY STEP TUTORIAL HOW TO ROOT Tecno Spark 6 WITH PC:

NO MATTER WHAT OS YOUR PC IS RUNNING ON, JUST DOWNLOAD THE VERSION LISTED BELOW. THIS TOOL WORKS FOR BOTH WINDOWS AND MAC OS.

  1. Download and Install the latest version of Legit Root Tools (Link below).
  2. Enable USB debugging mode on your Tecno Spark 6.

Go to Settings, About Phone, scroll down to Build Number. Tap it seven times, at which point you should see the message, “You are now a developer!”. Then go back to Settings, Developer Mode, and enable USB Debugging.

  1. Run Legit Root Tools on your PC, then connect your smart-phone via it’s USB sync cable. Wait a few seconds for Legit Root Tools to recognize your Tecno Spark 6 model and version number.

If it’s not detected automatically, you can choose Tecno Spark 6 in settings to manually set your device.

  1. Your Tecno Spark 6 screen may ask you for permission “allow usb debugging?” . Tick “always allow from this computer,” then hit ok
  2. Tap the root button, sit back and be patient.
  3. Once the process is complete, the phone will restart and you will have a rooted Tecno Spark 6

That is all about How To Root Tecno Spark 6 using Legit Root Tools. If you have any questions regarding How To Root Tecno Spark 6, let us know in the comment section down below.

NB: Even though the picture tutorial is not for Tecno Spark 6, but the root process of Tecno Spark 6 using Legit Root Tools is also same.

DOWNLOAD LEGIT ROOT TOOLS (LINK UPDATED)

LEGIT ROOT TOOLS FOR ANDROID
LEGIT ROOT TOOLS FOR WINDOWS
LEGIT ROOT TOOLS FOR MAC OS X

Leave a Reply

Your email address will not be published. Required fields are marked *